Kingston KVR32S22D8/16 16gb 1x16 Ddr4 programmed to JEDEC standard, 260-pin DIMM uses gold contact fingers Sodimm Memory
Product Description
Enhance your laptop's performance with Kingston KVR32S22D8/16 DDR4 SODIMM Memory. Unleash 16GB of high-speed, reliable RAM for seamless multitasking and efficient operations. Elevate your computing experience with Kingston's trusted memory solution.
Product Specifications
- Brand: Kingston
- Model: KVR32S22D8
- CL(IDD): 22 cycles
- Row Cycle Time (tRCmin): 45.75ns(min.)
- Refresh to Active/Refresh: 350ns(min.)
- Command Time (tRFCmin)
- Row Active Time (tRASmin): 32ns(min.)
- UL Rating: 94 V - 0
- Operating Temperature: 0oC to +85oC
- Storage Temperature: -55oC to +100o C
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for
- data, strobe, and mask signals
- Low-power auto self-refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
- via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.18” (30.00mm)
- RoHS Compliant and Halogen-Free
- Overview:
- This document describes ValueRAM's KVR32S22D8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 2 Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers.
- Features:
- 16GB Memory
- DDR4
- SODIMM